BT VP1000 Betriebsanweisung PDF herunterladen (Seite 44)

SHOW / OK

OFF

HOME

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

Add / Delete Keypad

ADDING AND NUMBERING A KEYPAD

At the Control Panel, follow these instructions:

PRESS DISPLAY

Until the display shows

SYSTEM PROFILE.

Enter your MASTER CODE –

if you have not selected a

personal PIN number, this will

be the default setting – 2580.

Until the display shows

ADD / DEL KEYPAD.

Display shows 1-WAY KP NO:-

Enter the Keypad number you

want. e.g. 1 or press NEXT to

find the next available Keypad

location.

Display shows ACTIVATE NOW.

Press the ✱ button (next to 0) on

the Keypad for two seconds. You

will hear a confirmation melody.

Display shows

KEYPAD NO: (number) plus a black

box to signify that the slot is taken.

The Keypad is now registered.

Choose either:

To move to the next Keypad.

Three times then <OK> to exit

to return to READY.

DELETING A KEYPAD

You may at some point decide you do not wish

to use one or more of the Keypads. To delete a

Keypad from the Control Panel, follow these

instructions:

PRESS DISPLAY

Until the display shows

SYSTEM PROFILE.

Enter your MASTER CODE –

if you have not selected a

personal PIN number, this will

be the default setting – 2580.

Until the display shows

ADD / DEL KEYPAD.

Display shows KEYPAD NO:-

Enter the Keypad number you wish

to delete e.g. 1 or press NEXT to

scroll through the list.

Display shows <OFF> TO DELETE.

Display shows

KEYPAD NO: (number).

Choose either:

To move to the next Keypad.

Three times then <OK> to exit

to return to READY.

You may also wish to remove the battery.

SHOW / OK

HOME

SECTION 5

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

BT VP1000 Betriebsanweisung Seite 44

Kommentare zu diesen Handbüchern